Download
Share
Print this page
TVLogic LXM Series Operation Manual
  1. Manuals
  2. Brands
  3. TVLogic Manuals
  4. Monitor
  5. LXM Series
  6. Operation manual

TVLogic LXM Series Operation Manual

Professional 4k/uhd lcd monitor
Hide thumbs

Advertisement

Quick Links

Download this manual
Operation Manual V1.2

Advertisement

loading
Need help?

Need help?

Do you have a question about the LXM Series and is the answer not in the manual?

Questions and answers

Related Manuals for TVLogic LXM Series

Summary of Contents for TVLogic LXM Series

  • Page 1 Operation Manual V1.2...
  • Page 2 FCC (Federal Communications Commission) This equipment has been tested and found to comply with the limits for class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interface when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
  • Page 3 Contents Caution Main Features Controls, Indicators, Connections Menu Tree & Adjustment Menu Operations [1] Picture [2] Video & Display [3] Color [4] GPI [5] Marker [6] Function Key [7] Waveform & Focus [8] Audio [9] System Function Details Video Support Resolution Product Specifications...
  • Page 4 01 CAUTION 4K/UHD 12G-Quad Multi View Monitor • Power Requirements c. When the product has been exposed to rain LXM-180U/180P/240U/240P or water. : AC 100~240V(50~60Hz) / DC 12V~24V d. When the product does not operate properly LXM-320P/550U as described in the operating instructions. : AC 100~240V(50~60Hz) Do not touch the controls other than those described in the operating instructions.
  • Page 5 01 CAUTION 4K/UHD 12G-Quad Multi View Monitor • Do not place the product on an unstable cart, • When installing the product on the rack, the stand, tripod or table. Placing the product on inside of the product would be overheated due an unstable base can cause the product to fall, to heat from other devices nearby and the resulting in serious personal...
  • Page 6 01 CAUTION 4K/UHD 12G-Quad Multi View Monitor VESA WALL MOUNTING : LXM-180U < Guide about VESA Mounting Screws > - When mounting on the wall bracket, fix the monitor using 4 pieces of M4.0 x 10mm screws. - Use the 100mm x 100mm VESA MOUNTING tap holes on the rear housing.
  • Page 7 01 CAUTION 4K/UHD 12G-Quad Multi View Monitor VESA WALL MOUNTING : LXM-180P < Guide about VESA Mounting Screws > - When mounting on the wall bracket, fix the monitor using 4 pieces of M4.0 x 10mm screws. - Use the 100mm x 100mm VESA MOUNTING tap holes on the rear housing.
  • Page 8 01 CAUTION 4K/UHD 12G-Quad Multi View Monitor VESA WALL MOUNTING : LXM-240U < Guide about VESA Mounting Screws > - When mounting on the wall bracket, fix the monitor using 4 pieces of M4.0 x 10mm screws. - Use the 100mm x 100mm VESA MOUNTING tap holes on the rear housing.
  • Page 9 01 CAUTION 4K/UHD 12G-Quad Multi View Monitor VESA WALL MOUNTING : LXM-240P < Guide about VESA Mounting Screws > - When mounting on the wall bracket, fix the monitor using 4 pieces of M4.0 x 10mm screws. - Use the 100mm x 100mm VESA MOUNTING tap holes on the rear housing.
  • Page 10 01 CAUTION 4K/UHD 12G-Quad Multi View Monitor VESA WALL MOUNTING : LXM-320P / LXM-550U < LXM-320P Guide about VESA Mounting Screws > - When mounting on the wall bracket, fix the monitor using 4 pieces of M8.0 x 15mm screws. - Use the 400mm x 200mm VESA MOUNTING tap holes on the rear housing.
  • Page 11 LXM series monitors contain the following features. • Support Various Interfaces • Various Audio Monitoring Functions - The LXM series monitors offer the various - This product supports various input and audio monitoring tools such as Audio Level output interfaces below.
  • Page 12 4K/UHD 12G-Quad Multi View Monitor 03 CONTROLS, INDICATORS, CONNECTIONS LXM-180U : FRONT & REAR QUAD MULTI DIGITAL EOTF INFO. MENU/EXIT ENTER POWER VIEW...
  • Page 13 4K/UHD 12G-Quad Multi View Monitor 03 CONTROLS, INDICATORS, CONNECTIONS LXM-180P : FRONT & REAR QUAD MULTI DIGITAL EOTF INFO. MENU/EXIT ENTER POWER VIEW...
  • Page 14 4K/UHD 12G-Quad Multi View Monitor 03 CONTROLS, INDICATORS, CONNECTIONS LXM-240U : FRONT & REAR QUAD MULTI DIGITAL EOTF INFO. MENU/EXIT ENTER POWER VIEW...
  • Page 15 4K/UHD 12G-Quad Multi View Monitor 03 CONTROLS, INDICATORS, CONNECTIONS LXM-240P : FRONT & REAR QUAD MULTI DIGITAL EOTF INFO. MENU/EXIT ENTER POWER VIEW...
  • Page 16 4K/UHD 12G-Quad Multi View Monitor 03 CONTROLS, INDICATORS, CONNECTIONS LXM-320P : FRONT & REAR QUAD MULTI DIGITAL EOTF INFO. MENU/EXIT ENTER POWER VIEW...
  • Page 17 4K/UHD 12G-Quad Multi View Monitor 03 CONTROLS, INDICATORS, CONNECTIONS LXM-550U : FRONT & REAR QUAD MULTI DIGITAL EOTF INFO. MENU/EXIT ENTER POWER VIEW...
  • Page 18 PC for color calibration using the calibration INFO ● software provided by TVLogic. - Display the signal information window. - When pressing this button, the function list AUDIO OUT (Phone Jack) which shows the currently assigned function ●...
  • Page 19 "06 Function Details [4] Processed Output" in page 56. ● - Control the monitor with a protocol provided by TVLogic or the TSL 5.0 protocol. GPI-IN (RJ-45) ● - Control the monitor externally. The desired functions can be assigned to each pin.
  • Page 20 4K/UHD 12G-Quad Multi View Monitor 04 MENU TREE & ADJUSTMENT MENU CONSTRUCTION & MENU CONTROL & MENU CONTROL SEQUENCE & MENU TREE [1] Menu Construction [3] Menu Control Sequence This product can be controlled and set • Menu control sequence follows the order ●...
  • Page 21 4K/UHD 12G-Quad Multi View Monitor 04 MENU TREE & ADJUSTMENT MENU CONSTRUCTION & MENU CONTROL & MENU CONTROL SEQUENCE & MENU TREE [4] Menu Tree...
  • Page 22 4K/UHD 12G-Quad Multi View Monitor 04 MENU TREE & ADJUSTMENT MENU CONSTRUCTION & MENU CONTROL & MENU CONTROL SEQUENCE & MENU TREE [4] Menu Tree...
  • Page 23 4K/UHD 12G-Quad Multi View Monitor 04 MENU TREE & ADJUSTMENT MENU CONSTRUCTION & MENU CONTROL & MENU CONTROL SEQUENCE & MENU TREE [4] Menu Tree...
  • Page 24 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [1] PICTURE Picture Camera LUT LXM-180P ● - Apply the preloaded camera LUT for the SHARPNESS input signal. USER ASPECT H CAMERA LUT USER ASPECT H - Select the desired camera LUT to apply to Camera LUT the input signal.
  • Page 25 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [1] PICTURE Import 3D LUT Import 3D LUT ● - Load and save the 3D LUT files to the IMPORT LUT monitor. Save LUT As... SLOT 1 Note Load - Up to 10 3D LUT files can be saved from SLOT 1 to SLOT 10.
  • Page 26 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [2] VIDEO & DISPLAY Video & Display 3G FORMAT LXM-180P ● - Select the format of 3G input signal. FAST MODE - Selectable mode: [NORMAL] 3G FORMAT NORMAL [MODE A 444 10BIT_YCbCr] [A 444 10BIT_RGB] TIME CODE ENABLE [A 444 12BIT_YCbCr]...
  • Page 27 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [2] VIDEO & DISPLAY Video & Display CLOSED CAPTION (To be supported) LXM-180P ● - Set the closed caption function. FAST MODE - Selectable mode: [OFF], [608(ANC)], [608(Line21)], [708], [OP47] 3G FORMAT NORMAL Note TIME CODE ENABLE...
  • Page 28 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [3] COLOR Color - [MANUAL]: When [MANUAL] is selected, all LXM-180P sub menus from [Color Std(Load)] to [VIDEO Color Std Mode MANUAL RANGE] are adjustable. Color Std(Load) Color Space BT . 709 Color Std(Load) ●...
  • Page 29 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [3] COLOR Color COLOR Temp LXM-180P ● - Set the color temperature. Color Std Mode MANUAL - Selectable mode: [3200K], [5000K], [5600K], [6000K], [6300K], [6500K], [9300K], Color Std(Load) [CUSTOM 1], [CUSTOM 2] Color Space BT .
  • Page 30 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [3] COLOR Color VIDEO RANGE LXM-180P ● - Select the video range of the input signal. Color Std Mode MANUAL - Selectable mode: [Narrow (64-940)], [Narrow109 (64-1019)], [Full (0-1023)] Color Std(Load) Color Space Note BT .
  • Page 31 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [4] GPI DHCP LXM-180P ● - Activate and deactivate the DHCP mode. PIN 1 - Selectable mode: [OFF], [ON] NONE PIN 2 NONE IP ADDRESS (To be supported) ● - Set the IP address connected to the monitor. PIN 3 NONE SUBNET MASK...
  • Page 32 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [4] GPI - [D-UMD(TSL5 S-16C)]*: Display the 16 LXM-180P characters and the tally signal which are UMD DISPLAY input by TSL protocol V5.0. - [D-UMD(TSL5 D-8C)]*: Display a pair of 8 UMD POSITION characters and a pair of the tally signals UMD FONT SIZE SMALL...
  • Page 33 - Adjust the various modes of tally operation. UMD DISPLAY - The operation of sub menus varies depending on the settings in [UMD DISPLAY] UMD POSITION - [DEFAULT]: Original TVLogic managing UMD FONT SIZE SMALL method (VRT) - [USER COLOR]: The user can set each tally...
  • Page 34 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [4] GPI CHANNEL 1/2/3/4 LXM-180P ● - Adjust UMD character and UMD character color. UMD DISPLAY - These settings are adjustable when [UMD DISPLAY] UMD POSITION mode is selected to [UMD] and [ANC]. - In the single video mode, [CHANNEL 1] is displayed.
  • Page 35 MONITOR ID LXM-180P ● - Set the ID of each monitor when you control CHANNEL 2 monitors with TVLogic control protocol using RS-422/485 communication or Network or MONITOR ID when you set and use Dynamic UMD mode in UMD CHARACTER CHANNEL 2 [UMD DISPLAY] menu.
  • Page 36 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [4] GPI <Dynamic UMD Protocol (TSL V3.1)> * Transmission (18 Byte) (PC or Device -> Monitor) HEADER CONTROL DISPLAY DATA (1 BYTE) BYTE(1 BYTE) (16 BYTE) * [HEADER] : Display address (0~126) + 80 hex. * [CONTROL BYTE] bit 0 : Tally 1 (1=on, 0=off) bit 1 : Tally 2 (1=on, 0=off)
  • Page 37 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [4] GPI • Tally Type - Default - TSL_S8C(Single 8 Characters) & TSL_S16C(Single 16 Character) Bit 1 Bit 0 Operation (Tally2) (Tally1) CHANNEL1 CHANNEL1 CHANNEL1 CHANNEL1 - TSL_D8C(Dual 8 Character) Bit 3 Bit 2 Operation (Tally4)
  • Page 38 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [5] MARKER Marker MARKER LXM-180P ● - Select the marker type when the MARKER is MARKER displayed on the screen. - Selectable mode: [OFF], [16:9], [4:3], [14:9], CENTER MARKER [13:9], [1.85:1], [2.35:1], [1.85:1_4:3], [USER] SAFETY AREA FIT MARKER CENTER MARKER...
  • Page 39 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [5] MARKER Marker USER MARKER H1/ H2 LXM-180P ● - Set the position of the first(upper) and MARKER second(lower) horizontal marker lines. - Adjustment range CENTER MARKER LXM-180U: [0] to [1920] SAFETY AREA LXM-180P/240U/240P/320P/550U: FIT MARKER [0] to [3840] (Increments of 1)
  • Page 40 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [6] FUNCTION KEY Function key FUNCTION KEY MAPPING LXM-180P ● - Assign the desired function to [F1] to [F9] KEY LED ALWAYS ON button. - The selectable functions are listed on the right. F1 KEY MAPPING SCAN - The factory default settings are as follows.
  • Page 41 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [6] FUNCTION KEY Function key *Function List LXM-180P SCAN KEY LED ALWAYS ON ASPECT F1 KEY MAPPING SCAN MARKER H/V DELAY F2 KEY MAPPING ASPECT BLUE ONLY F3 KEY MAPPING MARKER FAST MODE F4 KEY MAPPING H/V DELAY COLOR STANDARD...
  • Page 42 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [7] WAVEFORM & FOCUS Waveform & Focus WAVE FORM INTENSITY LXM-180P ● - Adjust the brightness level of Waveform WAVE FORM DISPLAY WAVEFORM OFF and Vector Scope display. WAVE FORM INTENSITY - Selectable level: [1] to [15] (Increments of 1) WAVE FORM TRANS.
  • Page 43 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [7] WAVEFORM & FOCUS Waveform & Focus LUMA(Y') ZONE CHECK (To be supported) LXM-180P ● - Analyze the Luma(Y’) level of the input WAVE FORM DISPLAY WAVEFORM OFF image and displays the selected zone on WAVE FORM INTENSITY the screen.
  • Page 44 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [7] WAVEFORM & FOCUS Waveform & Focus LXM-180P WAVE FORM DISPLAY WAVEFORM OFF WAVE FORM INTENSITY WAVE FORM TRANS. OPAQUE WAVE FORM COLOR GREEN LINE WAVE FORM SELECT LINE POSITION LUMA ( Y’ ) ZONE CHECK <FOCUS ASSIST - COLOR ON>...
  • Page 45 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [7] WAVEFORM & FOCUS Waveform & Focus Y MIN LXM-180P - Set the minimum Luma(Y’) level. WAVE FORM DISPLAY WAVEFORM OFF - Adjustable level: [0] to [254] (Increments of 1) WAVE FORM INTENSITY - Pixels with values below the minimum WAVE FORM TRANS.
  • Page 46 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [8] AUDIO Audio LEVEL METER REFERENCE LXM-180P ● - Select the type of Audio Level Meter standard. LEVEL METER ENABLE - Selectable mode: [SMPTE DIGITAL], LEVEL METER SELECT [EBU DIGITAL], [SMPTE IRT], [BBC], [EBU], [DIN], [EXP DIN], [NORDIC], [SMPTE VU] LEVEL METER DISPLAY PAIR...
  • Page 47 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [9] SYSTEM System INTERNAL PATTERN LXM-180P ● - Generate the internal WHITE pattern. KEY LOCK NUMBER • • • • - Selectable range: [0%] to [100%] KEY LOCK ENABLE (Increments of 5) OSD DISPLAY CONTINUE ECO MODE TIMER...
  • Page 48 4K/UHD 12G-Quad Multi View Monitor 05 MENU OPERATIONS [9] SYSTEM System SET DEFAULT LXM-180P ● - Initialize OSD setting values to the factory KEY LOCK NUMBER • • • • default except for Key Lock password. KEY LOCK ENABLE - All the imported custom 3D LUT files are also deleted.
  • Page 49 CHANNEL 2 CHANNEL 3 CHANNEL 4 Waveform, Vector Scope, Audio Level Meter(16Ch), UMD The LXM series monitors offer an extremely useful and advanced Quad-View Display mode and Picture-by-Picture Display Mode. If you push the [MULTI-VIEW] button, you can select Quad-View mode or Picture-by-Picture mode.
  • Page 50 4K/UHD 12G-Quad Multi View Monitor 06 FUNCTION DETAILS [1] Multi-View Settings 3. How to select the screen and assign the input In Quad-View mode or Picture-by-Picture mode, if you push [F9] button, the first screen is selected and the input list appears. You can choose the desired input for the selected screen by turning and pushing [ENTER] knob.
  • Page 51 4K/UHD 12G-Quad Multi View Monitor 06 FUNCTION DETAILS [2] INFO Button & Function Button If you push [INFO] button, the Signal Information windows and the Function button list appear even in Quad-View mode and Picture-by-Picture mode. The Signal Information includes the input signal's format and SDI payload ID.
  • Page 52 4K/UHD 12G-Quad Multi View Monitor 06 FUNCTION DETAILS [3] Import and Apply 3D LUT files USB Flash Drive’s file system should be FAT32 ● Supported 3D LUT Format: cube ● Number of lattice points: 17 or 33 ● Length of 3D LUT file: up to 30 letters ●...
  • Page 53 4K/UHD 12G-Quad Multi View Monitor 06 FUNCTION DETAILS [3] Import and Apply 3D LUT files 1. Load 3D LUT Files 4) Return to [SLOT] by pressing [ENTER] knob and go to [IMPORT] Custom 3D LUT Custom 3D LUT SLOT SLOT 1 SLOT SLOT 1 IMPORT .
  • Page 54 4K/UHD 12G-Quad Multi View Monitor 06 FUNCTION DETAILS [3] Import and Apply 3D LUT files 1. Load 3D LUT Files 6) Select the 3D LUT file you would like to load, and click [LOAD] and [YES]. Custom 3D LUT Custom 3D LUT SLOT SLOT 1 SLOT...
  • Page 55 4K/UHD 12G-Quad Multi View Monitor 06 FUNCTION DETAILS [3] Import and Apply 3D LUT files 2. Apply the loaded 3D LUT files 1) Set [3D LUT ENABLE] to [ON]. Picture LXM-180P SHARPNESS USER ASPECT H USER ASPECT H Camera LUT CAMERA LUT CAMERA LUT OUT Custom 3D LUT...
  • Page 56 4K/UHD 12G-Quad Multi View Monitor 06 FUNCTION DETAILS [3] Import and Apply 3D LUT files 3. Delete the loaded 3D LUT files 1) Select the SLOT you would like to delete and click [DEL]. Then, the 3D LUT file loaded on the slot is deleted.
  • Page 57 06 FUNCTION DETAILS [4] Processed Output The LXM series monitors have the separate PROCESSED OUTPUT connector(BNC port), which allows the output of 3D LUT-applied signals and Camera LUT-applied signals. It enables 3G-SDI Quad-Link 12G-SDI to 12G-SDI Single-Link conversion as well as HDMI/SFP to SDI conversion.
  • Page 58 4K/UHD 12G-Quad Multi View Monitor 06 FUNCTION DETAILS [5] LUMA(Y') ZONE CHECK 1) COLOR PATTERN TYPE 3) ZEBRA PATTERN TYPE - Displays the pixels with the designated - Displays the pixels with the designated Luma(Y’) levels of the input image in colors. Luma(Y’) levels of the input image in zebra Pixels whose Y’...
  • Page 59 4K/UHD 12G-Quad Multi View Monitor 06 FUNCTION DETAILS [6] FIRMWARE UPDATE 1. Receive the latest firmware file from the official TVLogic dealer or download it from TVLogic website. *The firmware file can be used for all LXM models in common.
  • Page 60 4K/UHD 12G-Quad Multi View Monitor 07 VIDEO SUPPORT RESOLUTION [1] SDI Input...
  • Page 61 4K/UHD 12G-Quad Multi View Monitor 07 VIDEO SUPPORT RESOLUTION [1] SDI Input...
  • Page 62 4K/UHD 12G-Quad Multi View Monitor 07 VIDEO SUPPORT RESOLUTION [2] HDMI Input...
  • Page 63 4K/UHD 12G-Quad Multi View Monitor 07 VIDEO SUPPORT RESOLUTION [3] SFP Input (SDI Signal)
  • Page 64 RJ-45 Input(Ethernet), Firmware Update & Remote Control 1 x REMOTE RJ-45 Input, GPI Control 2 x RS-422 RJ-45 Input & Output, Monitor Control by TVLogic Protocol or TSL Protocol 1 x USB USB A type, Firmware Update General Audio Out...

This manual is also suitable for:

Lxm-180uLxm-180pLxm-240uLxm-240pLxm-320pLxm-550u