Sonel WMGBMPI525 User Manual page 51

4. If a PIN code change is necessary, select Modify PIN code.
5. Set the required code with the cursors.
The same code must be entered in the computer programme. It is used for securing transmission.
6. To start transmission, select Wireless transmission in the MENU or press F1 in the MEM position.
The following messages will be displayed: Connecting and then Connection active. If it is impossible
to establish connection the message Wireless connection lost will appear. Once the connection is
established, follow the programme manual for data filing.
Note:
Standard pin for OR-1 is the „123".
MPI-525 – USER MANUAL
49