Sonel WMGBMPI525 User Manual page 32

Remarks:
- The measurement is interrupted, if during measurement of U
current or if RCD has not been tripped in other cases or if a preset value of safe voltage U
exceeded.
- Store the result in the memory (see point 4.1) or press ESC push-button and display only network
voltage and frequency.
- Remaining remarks and information are the same as for I
30
Groups of results displayed are changed by means
of F3 and F4 push-buttons.
MPI-525 – USER MANUAL
Read out the result.
/R RCD has been tripped at 0.5I
B E,
and Z measurement.
A L-PE
n
has been
L