Sonel WMGBMPI525 User Manual page 28

26
Mark an appropriate position by means of
push-buttons and confirm by pressing ENTER.
Connect the device to the installation according to the drawing.
Press START to begin measurement.
MPI-525 – USER MANUAL
U
Press F1 push-button
L
and move to selection of U
G S
Press F2 push-button
and move to selection of RCD
type.
Press F3 push-button
MODE
and move to selection of
measurement mode.
The meter is ready for
measurement.
Value of network volt-
age and frequency can
be read on the display.
.
L
and