Sonel WMGBMPI525 User Manual page 39

Remarks:
When "Object under voltage" message is displayed, the object tested is live. The
measurement is blocked. The meter must be immediately disconnected from the ob-
ject.
Additional information displayed by the meter
NOISE!
Connect the meter to the object tested.
Measurement starts automatically.
Press START push-button in order to
start a next measurement without dis-
connecting test leads from the object.
ATTENTION!
Interference voltage occurs on the object tested. The meas-
urement is possible however it will be burdened with addi-
tional uncertainty that is specified in the technical data.
MPI-525 – USER MANUAL
Read out the re-
sults.
37