Ricoh AP2600N User Manual page 154

Troubleshooting
Messages/Second messages
Duplex Cancelled
Energy Save Mode
Exceeded Max. Pages (Col-
late)
Exceeded Max. Stored Files
5
Exceeded Max. Stored Pages
Hardware Problem
Ethernet
60
Description
Duplex Print has been can-
celed.
The printer is in Energy Saver
mode.
An error has occurred in the
collation table overflow.
The sample print job or the
locked print job to be sent
from the computer will cause
the maximum number of files
to be exceeded.
The sample print job or the
locked print job to be sent
from the computer will cause
the maximum number of stor-
able pages to be exceeded.
An error has occurred in the
optional Network Interface
Board.
Solution
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
Load paper into the tray indi-
cated.
Wait for a while.
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
Delete the stored files.
Reduce the number of pages
to print.
First, turn off the power
switch and then on. If the mes-
sage appears again, call your
sales or service representative.
Turn off the power switch .
Replace the Network Interface
Board and turn on the power
switch. See "Installing Network
Interface Board Type 2600" in
the Setup Guide.
Turn off the power switch, re-
move the Network Interface
Board and turn on the power
switch.
Note
❒ If you remove the Net-
work Interface Board, you
cannot print over the net-
work. You can send a print
jobs to the printer only via
a parallel cable connection.