Ricoh AP2600N User Manual page 50

Configuring the Printer for the Network
B
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Host
Interface" menu.
C
Press { { { { Enter #} } } } .
ZDDS021N.eps
On Line
3
Job Reset
Form Feed
Power
The following message appears on
the panel display.
D
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Net-
work Setup".
E
Press { { { { Enter #} } } } .
The following message appears on
the panel display.
38
Menu
Escape
Enter
Error Data In
F
Select the protocol you want to
use.
Note
Do not select protocols that are
not used on your network.
A Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"Active Protocol".
B Press { { { { Enter #} } } } .
The current setting appears on
the panel display.
C Press { { { { U U U U } } } } or { { { { T T T T } } } } to display the
protocol you want to use.
D Press { { { { Enter #} } } } .
The actual procedure may differ
depending on the protocol you
use. Follow the appropriate
procedure.
GVHVIVJVL
TCP/IP
KVL
NetWare
L
Apple-
Talk
L
NetBEUI
G
If you use TCP/IP, you should as-
sign the IP address to the printer.
Note
To get the IP address for the
printer, contact your network
administrator.
A Press { { { { U U U U } } } } or { { { { T T T T } } } } until the fol-
lowing message appears.