Ricoh AP2600N User Manual page 123

8K
16K
• ❍ means that the size is supported but the paper size should be set with the
operation panel. There is no dial on the tray.
⇒ P.41 "Loading Paper in the Bypass Tray"
⇒ P.46 "Loading envelopes into the Envelope Feeder Unit"
• ✩ means that the size is supported and indicated on the tray dial. Be sure to
set the paper size dial to match the actual paper size loaded in the tray.
• # means that the size is supported but not indicated on the tray dial. You
should set the tray dial to "p", and select the paper size with the operation
panel.
• ❍* means that the supported size is approximately 3.55" - 12.00" in width,
and approximately 5.83" - 17.00" in length. The supported size may differ de-
pending on the printer language you use. Use the printer driver to set the cus-
tom size. Set the custom size setting with the operation panel.
• X means that the size is not supported.
❖ ❖ ❖ ❖ Paper weight and number of sheets to be set
Paper Tray
Paper Feed Unit Type 2600 (option)
Bypass Tray
Envelope Feeder Type 2600
*1
Confirm that the top of the stack is not higher than the limit mark indicated on the
side fence of the tray.
*2
The Envelope Feeder Unit requires the installation of the optional Paper Feed Unit.
K
" × 15.35"
1
10 /
2
K
7.68" × 10
L
" × 7.68"
1
10 /
2
Supported paper weight
2
60 - 105 g/m
2
60 - 105 g/m
2
52 - 162 g/m
*2 P.34 "Types of Paper and Other Media".
Paper and Other Media Supported by This Printer
❍
❍
1
/ "
2
❍
Maximum number of
sheets (plain paper)
(16 - 28 lb) 250 (80 g/m
(16 - 28 lb) 500 (80 g/m
(14 - 42 lb) 100 (80 g/m
For other kind of papers,
see P.34 "Types of Paper and
Other Media".
X X X
X X X
X X X
*1
2
, 20 lb)
2
, 20 lb)
2
, 20 lb)
3
29