Ricoh AP2600N User Manual page 155

Messages/Second messages
Hardware Problem
HDD
Hardware Problem
IEEE1394
Hardware Problem
NV-RAM
Error & Status Messages on the Operation Panel
Description
An error has occurred in the
optional Hard Disk Drive.
An error has occurred in the
optional 1394 Interface Unit.
An error has occurred in the
printer.
Solution
First, turn the power switch
off and then on, If the message
appears again, call your sales
or service representative.
Turn off the power switch. Re-
place the Hard Disk Drive and
turn on the power switch. See
"Installing Hard Disk Drive
Type 2600" in the Setup Guide.
Turn off the power switch. Re-
move the Hard Disk Drive
and turn on the power switch.
Note
❒ If the Hard Disk Drive is
not installed, you cannot
send the sample print job,
locked print job and
download the font to Hard
Disk Drive using the PS
Utility for Mac.
First, turn the power switch
off and then on, If the message
appears again, call your sales
or service representative.
Turn off the power switch. Re-
place the 1394 Interface Unit
and turn on the power switch.
See "Installing 1394 Interface
Unit Type 2600" in the Setup
Guide.
Turn off the power switch, re-
move the 1394 Interface Unit
and turn on the power switch.
Note
❒ If you remove the 1394 In-
terface Unit, you cannot
send print jobs via the 1394
Interface Unit. You can
only send print jobs to the
printer via the parallel ca-
ble connection.
First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
5
61