Ricoh AP2600N User Manual page 322

NetWare Configuration
I
Click the [NetWare] tab, and make the following settings.
A In the [Print Server Name] box, type the name of the print server.
B In the [File Server Name] box, type the name of the file server in which a
print server is to be created.
Clicking [Browse], you can select a file server among those listed in the
[Browse] dialog box.
C In the [Print Server Operation Mode] group, click [As Remote Printer].
D In the [Remote Printer No.] box, type the printer number.
Important
❒ Use the same printer number as that to be created in the printer server.
E Click [OK] to close the property sheet.
4
F After a confirmation dialog box appears, click [OK].
J
On the [NIB] menu, click [Exit] to exit the NIB Setup Tool.
K
Type "PCONSOLE" from the command prompt.
F:> PCONSOLE
L
Create a print queue as follows.
Note
❒ If you use a currently defined print queue, go to step L.
A From the [Available Options] menu, select [Print Queue Information] and press
the { { { { ENTER} } } } key.
B Press the { { { { INSERT} } } } key and type a print queue name.
C Press the { { { { ESC} } } } key to return to the [Available Options] menu.
M
Create a printer as follows.
A From the [Available Options] menu, select [Print Server Information] and press
the { { { { ENTER} } } } key.
B To create a new print server, press the { { { { INSERT} } } } key and type a print
server name.
If you use an currently defined print server, select one of the print servers
shown in the [Print Server] list.
Important
❒ Use the same name as that specified in the NIB Setup Tool. (Step H).
C From the [Print Server Information] menu, select [Print Server Configuration].
D From the [Print Server Configuration] menu, select [Printer Configuration].
E Select the printer which is indicated as "Not Installed".
Important
❒ Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step I-D).
58