Printronix P5 Quick Setup Manual page 30

Install Basic Components
Left Hub
Figure 26. Threading the Ribbon around the Ribbon Guide
6. Thread the ribbon around the ribbon guide and along the ribbon
path. Be sure to thread the ribbon between the hammer bank
cover and the ribbon mask.
7. Place the empty spool on the left hub.
8. Press the spool down until the hub latch snaps into place.
9. Turn the empty spool by hand to make sure the ribbon tracks
correctly in the ribbon path and ribbon guides.
NOTE: The P5220 printer automatically winds the leader onto the
30
spool, once the printer is set online and the next print job is
received.
Ribbon Guide