Adjust The Paper Supports - Printronix P5 Quick Setup Manual

Set Up The Printer
Wood Blocks (6)
Figure 9. Removing the Six Wood Blocks - All Models
17. Remove the six wood blocks.
NOTE: Make sure the tape securing the wood blocks is removed

Adjust The Paper Supports

Figure 10. Adjusting Paper Supports - P5000 Series Models
NOTE: The P5220 models have 4 paper supports.
Slide the paper supports inward until they are approximately four
inches from the tractor doors.
14
entirely.
Paper Supports (2)
Tractor Doors (2)