Set Up The Printer; Remove Packing Materials - Printronix P5 Quick Setup Manual

Set Up The Printer

Remove Packing Materials

CAUTION
To avoid shipping damage, reinstall the shipping restraints
whenever you move or ship the printer.
Save the cardboard packing, foam blocks, and bubble wrap along
with the other packing materials in case you need to move the
printer. If it is necessary to move the printer, reinstall the shipping
restraints, reversing the steps in this section.
Protective Film
Figure 3. Removing the Protective Film - All Models
1. Raise the printer cover.
2. Peel the tape off carefully and lift the protective film off the
control panel message display.
Control Panel
Message Display
Remove Packing Materials
9