Launch Creader Professional MOT III Manual page 32

LAUNCH
6 Reset
The Reset section is specially designed to provide you quick access to the
vehicle systems for various scheduled service and maintenance performances.
All resetting operations are driven by executive commands. Just by following the
on-screen prompts to select appropriate execution options, input correct values
or data, and perform necessary actions, the system will guide you through the
complete performance.
The most commonly performed service functions contain:
 ABS Bleeding
 AFS (Adaptive Front-lighting System) Reset
 Battery Register / Battery Maintenance
 Diesel Particulate Filter (DPF) Regeneration
 Electronic Parking Brake Reset
 Electronic Throttle Position Reset
 Gear Learning
 Gearbox Matching
 IMMO Service
 Injector Coding
 Oil Reset Service
 Steering Angle Calibration
 Sunroof Initialization
 Suspension Calibration
 Tire Pressure Monitor System Reset
ABS Bleeding
This function allows you to perform various bi-directional tests to check the
operating conditions of Anti-lock Braking System (ABS).
1. When the ABS contains air, the ABS bleeding function must be performed to
bleed the brake system to restore ABS brake sensitivity.
2. If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake
Creader Professional MOT III English User Manual
31