Launch Creader Professional MOT III Manual page 11

LAUNCH

Quick start guide

Password envelope
Note: Some accessories may vary depending on sales regions, please consult
local agency for package information.
2 Preparations
2.1 Charging the battery
Note:

Use the standard charger supplied with the product. Launch shall have no
liability for any damage or losses result from the misuse of non-standard
chargers.

Always charge on a non-flammable surface in well-ventilated area.
If the power level drops below 10% while the tablet is on, a "Connect Charger"
notification will appear on the screen, follow the steps below to charge the
tablet:
1. Plug one end of the included power adaptor into the USB port of the tablet.
2. Connect the other end to the AC outlet.
If appears on the screen, it indicates it is charging. If the symbol changes
into , it indicates that the battery is fully charged. Unplug the power adaptor
from the AC outlet and tablet.
2.2 Power on/off
2.2.1 Power on
Press and hold the [POWER] button about 1 second to turn on the tablet. The
system starts initializing and then enters the Home screen.
Note: If it is the first time you have used this tool or the tool remains idle for a
long period of time, the tool could fail to turn on. Please charge the tool for a
minimum of 5 minutes and attempt to turn on again.
Creader Professional MOT III English User Manual
10