Launch Creader Professional MOT III Manual page 28

LAUNCH
Creader Professional MOT III English User Manual
on and retrieve codes again. If there are still some trouble codes in the system, please
troubleshoot the code using a factory diagnosis guide, then clear the code and recheck.
5.3.4 Read Data Stream
This option lets you view and capture (record) real-time Live Data. This data
including current operating status for parameters and/or sensor information can
provide insight on overall vehicle performance. It can also be used to guide
vehicle repair.
Note: If you must drive the vehicle in order to perform a troubleshooting procedure,
ALWAYS have a second person help you. Trying to drive and operate the diagnostic
tool at the same time is dangerous, and could cause a serious traffic accident.
In Fig. 5-7, tap Read Data Stream, the system will display data stream items.
Fig. 5-10
On-screen Buttons:
Select Page: Tap it to select all items of the current page. To select certain data
stream item, just check the box before the item name.
Unselect: Tap it to deselect all data stream items.
Confirm: Tap it to confirm and jump to the next step.
After selecting the desired items, tap Confirm to enter the data stream reading
page.
27