Clear Fault Memory - Launch Creader Professional Mot Iii Manual

LAUNCH
Creader Professional MOT III English User Manual
Fig. 5-9
On-screen Buttons:
Search: Highlight a certain DTC item, and then tap it to search for more
information about the selected DTC online.
Report: To save the current data in text format. All reports are saved under the
tab Diagnostic Report in My Report from Profile menu. For details on report
operations, please refer to Chapter 9.4 My Report.
When an emission-related fault occurs, certain vehicle conditions
Freeze Frame:
are recorded by the on-board computer. This information is referred to as freeze
frame data. Freeze frame data includes a snapshot of critical parameter values
at the time the DTC is set.

5.3.3 Clear Fault Memory

After reading the retrieved codes from the vehicle and certain repairs have been
carried out, you can use this function to erase the codes from the vehicle. Before
performing this function, please be sure the vehicle‟s ignition key is in the ON
position with the engine off.
In Fig. 5-7, tap Clear Fault Memory, a confirmation dialog box pops up on the
screen.
Tap Yes, the system will automatically delete the currently existing trouble code.
Note: After clearing, you should retrieve trouble codes once more or turn ignition
26