Launch Creader Professional MOT III Manual page 14

LAUNCH
3 Network Setting
The tablet has built-in Wi-Fi that can be used to get online. Once you‟re online,
you can register the tool, surf the Internet, get apps, send email, launch the
remote diagnosis, and check for software updates etc.
3.1 Connect to a Wi-Fi network
1. On the home screen, tap Settings -> WLAN.
2. Move the Wi-Fi switch to ON, the tablet starts searching for available wireless
LANs.
3. Select the desired Wi-Fi network from the list,
 If the chosen network is open, you can connect directly;
 If the selected network is encrypted, a network password will need to be
entered.
4. When Connected appears, it indicates that the tablet is properly connected
to the network.
Note: Turning OFF the Wi-Fi switch when not in use will help conserve battery
power.
Once it is connected successfully, tap the connected network from the list to
view its name, status, signal strength, link speed, security type, etc.
When this tool is in range, it will connect to the previously linked network
automatically.
3.2 Disconnect from a Wi-Fi network
1. On the home screen, tap Settings -> WLAN.
2. Tap the network with a Connected status, then tap Disconnect.
Creader Professional MOT III English User Manual
13