Launch Creader Professional MOT III Manual page 29

LAUNCH
Note:
1. If the value of the data stream is within the reference value, it displays in black
(normal mode); if not, the whole line will display in red.
2. The indicator 1/X shown on the bottom of the screen stands for the current
page/total page number. Swipe the screen from the right/left to advance/return to the
next/previous page.
On-screen Buttons:
Graph: After selecting, tap it to view the waveform. There are three types of
display modes available for data viewing, allowing you to view various types of
parameters in the most suitable way.
 Graph – displays the parameters in waveform graphs.
Creader Professional MOT III English User Manual
Fig. 5-11
28