Launch Creader Professional MOT III Manual page 22

LAUNCH
vehicle health.
Tap Health Report, the system start scanning the ECUs. Once the scanning is
complete, a screen similar to the following appears:
In Fig. 5-3, the tested system with fault code appears in red and the system with
OK displays in black (normally).
Tap the desired system to enter the test function selection page. For detailed
operations on test function, please refer to Chapter 5.3 System selection.
On-screen Buttons:
Clear DTC: Tap to clear the existing diagnostic trouble codes. See Chapter
5.1.2.
Fault Report: Tap to view the health report in details. See Chapter 5.1.1.
5.1.1 View fault report
This function allows you to view the health report in details.
Creader Professional MOT III English User Manual
Fig. 5-3
21