Advertisement
1.888.610.7664
2.4.11
Lockout Mode
The Lockout Mode protects you from accidental value changes or from tam-
pering. When you activate lockout, no mode values can be changed.
To activate Lockout, complete the following step:
Press and hold the
button, press the
The letter "L" appears on the display for approximately 3 seconds show-
ing that Lockout has been activated.
To deactivate Lockout, complete the following steps:
1. Press the
button once to get the emissivity adjustment display.
2. Press the
button, the
button 3 times, then release. The letter "E"
displays for approximately 3 seconds showing that Lockout has been
deactivated.
3. Press the
button until the temperature mode displays.
2.4.12
Factory Defaults
If you need to reset the Thermalert GP monitor to its factory default settings,
you can do so by pressing and holding the
button 3 times.
26
Thermalert GP Series Operator's Manual
www.calcert.com
15
10
20
5
25
0
30
button 3 times, then release.
button and then pressing the
sales@calcert.com
Advertisement
Need help?
Do you have a question about the Thermalert GP Series and is the answer not in the manual?
Questions and answers