Novation ReMOTE SL User Manual page 85

IMPOSCAR
A group of two standard templates, which mainly follow the standard synth parameter layout, is used for impOSCar.
Encoder 3 is used to control osc 1 wave in template 1 and osc 2 wave in template 2.
MINIMONSTA
A group of two standard templates, which mainly follow the standard synth parameter layout, is used for Minimonsta. The
encoders are assigned to Osc 1 and Delay parameters on template 1 and Osc 2 and Osc 3 parameters on template 2.
ODDITY
A group of two standard templates, which mainly follow the standard synth parameter layout, is used for Oddity. Additional
osc parameters are assigned to the pots and lower left-hand row of buttons. HPF cutoff is assigned to encoder 6. VCA
and VCF velocity amounts are assigned to sliders 7 and 8.
MS-20
This template follows the standard synth parameter layout. The lower left-hand buttons are assigned to
Osc 2 parameters.
POLYSIX
This template mainly follows the standard synth parameter layout. The sliders and upper right-hand buttons are assigned
to the arpeggiator parameters.
LEGACYCELL
The encoders are assigned to the encoder parameters and the sliders are assigned to the slider parameters.
CS-80V
A group of two standard templates is used for the CS-80V. Before using these templates you must copy a mapping file
to your computer. Locate the file 'controlMidi' in the CS-80V resources folder on the ReMOTE SL DVD and copy it to the
following location:
PC: C:\Program Files\Arturia\CS-80V\save
Mac: HD/Library/Preferences/Cs80V/save
The ReMOTE SL CS80-V templates will then map correctly to the software. Template 1 should be used to control osc 1
and its HPF and LPF filters. Template 2 should be used to control osc 2 and its HPF and LPF filters. With both templates
the HPF parameters are assigned to encoders 7 and 8 and the LPF parameters are assigned to pots 7 and 8.
ARP2600V
A group of two standard templates is used for the ARP2600V. Before using these templates you must copy a mapping file
to your computer. Locate the file 'controlMidi' in the ARP2600V resources folder on the ReMOTE SL DVD and copy it to
the following location:
PC: C:\Program Files\Arturia\ARP2600V\save
Mac: HD/Library/Preferences/arp2600v/save
The ReMOTE SL ARP2600V templates will then map correctly to the software. The templates follow the general synth
parameter layout where possible. Template 1 contains controls assigned to osc 1 and template 2 contains controls
assigned to osc 2.
85