Rear Panel Connections And Other Features - Novation ReMOTE SL User Manual

3.2 ReAR PANeL CONNeCTIONS AND OTHeR FeATUReS

1 2 3
1. PSU Connector: This allows a power supply unit (not supplied with the ReMOTE SL) to be connected for powering the
ReMOTE SL from a mains supply.
2. Power select switch: This sets the power supply between Battery/DC, Off and USB.
3. USB connector: This allows the ReMOTE SL to be connected to a computer using the supplied USB cable. The USB
connection provides power as well as data flow.
4. Sustain pedal input: This allows connection of a damper-style sustain pedal or footswitch to the ReMOTE SL.
5. Expression pedal input: This allows connection of an expression pedal to the ReMOTE SL.
6. 5-pin DIN MIDI Connectors: These allow the ReMOTE SL to be connected to other hardware MIDI devices. Four
connectors are provided in total – one IN, one THRU and two OUT connectors.
Battery Compartment: Found on the bottom of the unit, this compartment holds four 1.5V IEC R14 (C size) batteries for
powering the ReMOTE SL.
Pitch/Mod Joystick Spring Selector: Found on the bottom of the ReMOTE SL, this slider selects whether the pitch/mod
joystick springs to the bottom or moves freely in the vertical (mod) direction. Slide it towards the back of the ReMOTE SL
to enable the spring or towards the front for free movement. The raised end (opposite the slider) must be gently pushed in
before the slider is moved backwards or forwards.
4 5 6