Novation ReMOTE SL User Manual page 51

The MOTU DP Automap template (Template 34) must be selected on the ReMOTE SL when using it in Digital Performer
Automap mode. Once you have followed the above set up instructions, the ReMOTE SL will automatically switch to the
MOTU DP Automap template and will do so each time you subsequently start Digital Performer. Whilst using the ReMOTE
SL in Digital Performer Automap mode, you can switch to any other template on the unit (for example to control AU plug-
ins) and then switch back to the MOTU DP Automap template to control Digital Performer again.
It is important to ensure that 'ReMOTE SL port 1' is selected as the input for all MIDI and Instrument tracks in Digital
Performer so that Automap data on ports 2 and 3 does not get routed to soft-synths and MIDI devices. To allow specific
input ports to be selected, you need to turn on Multi Record by selecting it from the 'Studio' menu in Digital Performer.
The Automap Universal Server software allows tempo control from the ReMOTE SL over any ReWire host application,
including Digital Performer (see section 13.1). If you are using the Automap Universal template (template 38) to control
Automap-wrapped AU plug-ins in Digital Performer then it is also possible to use the transport controls on the ReMOTE SL
to control the transport in Digital Performer via ReWire (see section 7.2). For this tempo and transport control to work
you must enable the Automap Server as a ReWire input in Digital Performer. To do this, create a stereo aux track in your
session and set its input to 'Automap Universal Transport:Dummy channel L 1-Dummy channel R 2'.
Controlling the Digital Performer Mixer
You can use the ReMOTE SL to control the Digital Performer mixer as follows:
The BANK UP/DOWN buttons scroll through banks of 8 tracks. The DP Mixer window will always show the 8 tracks
currently available to control from the ReMOTE SL. Abbreviated track names are shown on the left-hand display (4
characters max.).
The 8 encoders can be used to control track panning or send level. To control track panning, press the 2nd ROW-SELECT
button on the left-hand side of the ReMOTE SL. To control send level, select a send bank using the SEND SELECT pot or
press the 3rd ROW-SELECT button on the left-hand side of the ReMOTE SL. The encoders will then control send level for
the selected send bank. The currently selected send bank is shown above the SEND SELECT pot on the top line of the left-
hand ReMOTE SL display ('Send A' to 'Send D' corresponds to send banks 1-4 in Digital Performer, 'Send E' is for Pro Tools
use only).
The current function of the encoders is indicated on the top line of the left-hand ReMOTE SL display, as follows:
Pan: Encoders control track panning.
Snd1: Encoders control send bank 1 level.
Snd2: Encoders control send bank 2 level.
Snd3: Encoders control send bank 3 level.
Snd4: Encoders control send bank 4 level.
t
51