Novation ReMOTE SL User Manual page 40

Again remember that any other MIDI devices will have their ports labeled as 'port 1', 'port 2' etc. too so be careful which
ports you connect!
9. Logic Express only: Select 'Channel Splitter' from the 'New' menu to create a Channel Splitter object. Delete the
connection from the Physical Input to the Input Notes keyboard. Make a new connection from the Physical Input to the
Channel Splitter and then another from the SUM port of the Channel Splitter to the Input Notes keyboard. Select
'Monitor' from the 'New' menu to create a Monitor object and connect the channel 16 port of the Channel Splitter to it.
The Environment should then look as follows:
Close the Environment. To avoid having to repeat step 8 or 9 every time you start a new project you may wish to save
the current project as the default project which loads when you start Logic. To do so, select 'Save As...' from the 'File'
menu, name the project 'autoload' and save it in the following location:
[user]/Library/Application Support/Logic/Song Templates
Note that step 8 or 9 should be repeated for any existing Logic projects.
The Logic Automap template (template 39) must be selected on the ReMOTE SL when using it in Logic Automap mode.
Once you have followed the above set up instructions, the ReMOTE SL will automatically switch to the Logic Automap
template and will do so each time you subsequently launch Logic. Whilst using the ReMOTE SL in Logic Automap mode, you
can switch to any other template on the unit (for example to control hardware MIDI devices or Automap-wrapped AU plug-
ins using the Automap Universal template) and then switch back to the Logic Automap template to control the Logic
mixer again.
The ReMOTE SL has two modes of operation when using it in Logic Automap mode – Mixer mode and Instrument mode.
Mixer mode can be used to control the Logic Mixer and Instrument mode can be used to control the software instrument
on the currently selected instrument track. Use the DRUM PAD ROW-SELECT button to switch between Mixer and
Instrument modes. The LED next to the DRUM PAD ROW-SELECT button will light when the ReMOTE SL is in
Instrument mode.
40