Novation ReMOTE SL User Manual page 47

The current function of the encoders is indicated on the top line of the left-hand ReMOTE SL display, as follows:
Pan: Encoders control panning of a mono track, or left-channel panning of a stereo track.
PanR: Encoders control right-channel panning of a stereo track.
SndA: Encoders control send bank A level.
SndB: Encoders control send bank B level.
SndC: Encoders control send bank C level.
SndD: Encoders control send bank D level.
SndE: Encoders control send bank E level.
ASGN: Encoders control send routing of currently selected send bank.
FLIP: ReMOTE SL is in Flip Mode (see below)
The upper left-hand row of buttons on the ReMOTE SL can be used to set track automation mode. Select an automation
mode using the AUTOMATION MODE SELECT pot, then press a button in the top left-hand row to set the corresponding
track to the selected mode. The currently selected automation mode is shown above the AUTOMATION MODE SELECT
pot on the top line of the left-hand ReMOTE SL display. If you simply want to see the current automation mode of a track
without changing it, set the automation mode to '*View' and press the button corresponding to that track. The abbreviated
track name on the left-hand display will temporarily change to show that track's automation mode.
Controlling Sends – Flip Mode
Flip mode allows control over additional send parameters on the Pro Tools mixer. To put the ReMOTE SL into Flip mode,
press the 4th ROW-SELECT button on the left-hand side (next to the pots). The 4th ROW-SELECT LED will light when the
ReMOTE SL is in Flip mode. You can then use the ReMOTE SL to control sends as follows:
The left-hand ReMOTE SL display will look as it does in Track mode, however send routing is shown in place of abbreviated
track names (the '-' symbol indicates no send routing):
In Flip mode, the sliders control send level of the currently selected send bank. As in Track mode, the slider levels are
displayed on the right-hand ReMOTE SL display as a MIDI value (0-127). To see the slider value in dB, hold down the SLIDER
ROW-SELECT button whilst operating a slider and the abbreviated track name on the left-hand display will temporarily
change to show level in dB.
47