Vjamm - Novation ReMOTE SL User Manual

7. Ensure the 'In Port' and 'Out Port' are set to 'ReMOTE SL Port 3', then click 'OK'.
After following these steps you can switch between the Reason Automap template (to control Reason), the Automap
Universal template (to control Automap-wrapped plug-ins) and the Automap template for your sequencer. Remember
that you can use any of the three methods detailed in section 4.7 to switch between templates on the ReMOTE SL.
With Reason set up to use port 3 it will still be possible to use the ReMOTE SL with Reason when it is running in
stand-alone mode.
When the Reason Automap template is selected, the ReMOTE SL keyboard will control the currently selected Reason
device. When running Reason in ReWire mode with another sequencer, it may be desirable for the keyboard to send
data to whichever MIDI track is record enabled in your main sequencer instead of following the currently selected Reason
device. If you want the ReMOTE SL to work in this way then select the Reason Automap template and set KeybPort to 'U1'
in the Template menu. Note that the pitch/mod joystick, sustain pedal and expression pedal will also follow the
KeybPort setting.

10.6 VJAMM

Automapping with VJamm allows instant control of the software's main features. The basic functionality of the SL sees
the top and bottom rows of controls on the left side (buttons and trigger pads, respectively) selecting and triggering the
16 video clips in the main software window. Repeated presses of the row select buttons to the left of these two rows of
controls alternates between the two banks of 8 clips (Q-I and A-K), as shown in the diagram linked to below.
Meanwhile, the faders and top row of buttons on the right side are used to edit the currently selected clip or control the
main 'Master' VJ parameters, as shown in the diagram linked to below. These two modes are selected with alternate
presses of the arrow button to the right of the LCDs. The transport controls can be used to stop and play the selected clip
throughout both modes.
The pots and (in 2D mode) buttons above on the left side of the SL can also be used to edit 2D, 3D and FreeFrame
options for the currently selected clip. Simply press the row select button to the left of the row of pots repeatedly to cycle
between these three editing modes.
(Diagram on next page)
55