Novation ReMOTE SL User Manual page 80

Ports: This sets the port(s) on which MIDI data from the keyboard zone (note and aftertouch messages) are sent from the
ReMOTE SL. The options for this setting are as follows:
OFF: MIDI data is not transmitted
U1: sent to USB Port 1
U2: sent to USB Port 2
M1: sent to MIDI OUT Port 1
M2: sent to MIDI OUT Port 2
plus the following combinations of the above:
U1 M1
U2 M1
U1 M2
U2 M2
M1 M2
U1 M1 M2
U2 M1 M2
The second page of the Keyboard Zones menu is as follows:
Zones: This is a duplicate of the Zones setting on the first page of the Keyboard Zones menu.
Zone: This is a duplicate of the Zone setting on the first page of the Keyboard Zones Menu and selects the keyboard zone
whose settings you are currently editing.
AfterTch (Aftertouch): This sets whether or not aftertouch messages will be sent using the MIDI channel and ports
settings for that zone. Note that the ReMOTE SL has a channel aftertouch mechanism (not polyphonic aftertouch) meaning
that any keyboard key you press, whether it is within the zone range or not, will cause aftertouch messages to be sent
using the MIDI channel and ports settings for the that zone.
PitchBnd (Pitch Bend): This sets whether or not pitch bend messages will be sent using the MIDI channel and ports
settings for that zone when the joystick is moved in the horizontal (pitch) direction.
ModWheel (Modulation Wheel): This sets whether or not modulation wheel (CC1) messages will be sent using the MIDI
channel and ports settings for that zone when the joystick is operated in the vertical (mod) direction.
PitchBnd & ModWheel: This sets whether the pitch and modulation wheels are included in the keyboard zones or not
as follows:
USE TEMPLATE CHAN/PORTS: Joystick follows its individual settings as set in Edit mode and the PitchBnd and
ModWheel settings in the Keyboard Zones menu are ignored.
USE ZONE CHAN PORTS: Joystick transmits pitch bend and modulation messages on the MIDI Channels and Ports
for all zones that have PitchBnd and ModWheel set to 'ON'. The individual settings for the pitch and modulation
wheels, as set in Edit mode, are ignored. This means that if you have previously set the wheels to send other types of
MIDI messages in Edit mode i.e. not pitch bend and modulation messages, then when you set 'USE ZONE CHAN PORTS'
they automatically revert back to sending pitch and modulation messages (although the individual settings in Edit mode
will not be lost).
80