Novation ReMOTE SL User Manual page 46

Controlling The Mixer – Track Mode
You can use the ReMOTE SL to control the Pro Tools mixer as follows:
The left-hand ReMOTE SL display will look as follows in Track mode:
Abbreviated track names (4 characters max.) are shown on the bottom line of the display and the current wiper position is
shown in the top right-hand corner.
The 8 sliders control track level of the currently selected bank of tracks. The slider levels are displayed on the right-hand
ReMOTE SL display as a MIDI value (0-127). To see the slider value in dB, hold down the SLIDER ROW-SELECT button whilst
operating a slider and the abbreviated track name on the left-hand display will temporarily change to show level in dB.
The 8 encoders can be used to control track panning, send level and send routing. To control track panning press either
the 2nd or 3rd ROW-SELECT button on the left-hand side of the ReMOTE SL:
2nd ROW-SELECT button: Encoders control panning of a mono track, or left-channel panning of a stereo track.
3rd ROW-SELECT button: Encoders control right-channel panning of a stereo track.
To control send level, select a send bank using the SEND SELECT pot. The encoders will then control send level for the
selected send bank. The currently selected send bank is shown above the SEND SELECT pot on the top line of the left-hand
ReMOTE SL display.
To control send routing, press the ASSIGN (LEFT-HAND SCROLL DOWN) button and then use the SEND SELECT pot to
select a send bank. The left-hand display will change to show the current routing for the selected send bank, as shown:
The '-' symbol indicates no send routing and '>' indicates the current routing setting when scrolling through the different
options. Use the 8 encoders to change send routing and press the ASSIGN button once more to confirm your selection.
46