Chapter 27
Dialing plan: System settings
The panels described in the following information define various common system settings that
affect, or that are affected by, number planning.
The following paths indicate where to access system settings for dialing plans in Element Manager
and through Telset Administration:
•
Element Manager: Configuration > Telephony > Dialing Plan > General
•
Telset interface: **CONFIG > System Programming > Access codes; System Programming
> General > Direct Dial sets
Panels/Subpanels
"Common dialing plan settings" on
page 267
•
DN length
•
Dialing Time out
•
Park code
•
External code
•
Direct dial
Also refer to:
•
"Dialing plan: Public network" on page 275
•
"Dialing plan: Private network settings" on page 281
•
"Dialing plan: Line pools and line pool codes" on page 357
Click the navigation tree heading to access general information about dialing plans.
Common dialing plan settings
The fields on the Dialing Plan - General panel allow you to set some general system dialing
features.
Figure 85
illustrates the Dialing Plan - General panel.
Tasks
"To define a direct dial set" on
page 270
"Capabilities tab" in the Device
Configuration
Guide (NN40020-300)(assign
direct dial set to a telephone)
Feature notes
"Configuring CLID on your
system" on page 205
"DN length constraints" on
page 270
"Received number notes" on
page 271
"Tips about access codes" on
page 272
"Call Park codes" on page 273
Networking Configuration Guide
267