Chapter 7 Upgrades, Migrations, And Feature Expansion; Introduction - Nortel CallPilot Install Manual

Chapter 7
Upgrades, migrations, and feature
expansion
In this chapter
"Introduction" (page 255)
"Feature Expansion: Adding the High Availability feature to an existing
CallPilot 5.0 1005r server" (page 259)

Introduction

For the High Availability feature, there are minimal differences between the
upgrade and platform migration procedures and the new system installation
procedure. The main differences are:
•
•
•
Scenario 1: If you are upgrading or migrating to a CallPilot 5.0 1005r server
and are adding the High Availability feature, do the following:
1. Follow the instructions in CallPilot Upgrade and Platform Migration
2. Follow the instructions outlined in
Copyright © 2007, Nortel Networks
.
You must restore data from a backup as part of the upgrade or platform
migration.
You must restore data on both of the servers in the pair when performing
the upgrade. Restoring the data is required to ensure that all of the
registry settings in the backup (for example, the LDAP search base)
are restored correctly.
You must modify and add settings in Configuration Wizard (for example,
NIC card settings).
Guide (NN44200-400) to upgrade or migrate your server to a CallPilot
1005r server running CallPilot 5.0.
Note: Do not enable the High Availability feature when running the
Configuration Wizard.
Availability feature to an existing CallPilot 5.0 1005r server" (page 259)
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
"Feature Expansion: Adding the High
255