Nortel CallPilot Install Manual page 213

Disabling automatic failovers (stop monitoring)
Step
Assumption: This procedures assumes that automatic failovers are currently
enabled.
1
2
3
4
Copyright © 2007, Nortel Networks
.
Action
On AutoStart Console window, expand Domains >
[AutoStart_Domain] > Resource Groups and then select
CallPilot.
Click the Status tab.
Right-click Resource Groups > CallPilot.
From the shortcut menu, select Stop Monitoring.
Figure 122
Stop Monitoring
Result: On the Status tab, the Monitoring State turns to yellow and
shows a status of Disabled. On the Domains pane, the Resource
Groups > CallPilot changes to a green light with a black question
mark. The automatic failover is disabled.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
EMC AutoStart Agent and Console 213
—End—