Advanced Option - NEC MultiSync LCD4010 User Manual

OSM Controls
Main-Menu

ADVANCED OPTION

Sub-Menu
AV
S-VIDEO MODE
INPUT RESOLUTION
*:INPUT RGB2/3 only
AV
BLACK LEVEL
EXPANSION
*:INPUT VIDEO only
GAMMA SELECTION
IMAGE FLIP
AV
SCAN MODE
*:INPUT DVD/HD,
VIDEO only
SCAN
CONVERSION
AV
FILM MODE
*:INPUT DVD/HD,
VIDEO only
MONITOR ID
-Advanced option
ADVANCED OPTION
S-VIDEO MODE
S-VIDEO MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP
PRIORITY
SCAN MODE
SCAN CONVERSION
FILM MODE
+ -:SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION INPUT RESOLUTION
S-VIDEO MODE
AUTO
INPUT RESOLUTION
1024 X 768
GAMMA SELECTION
1280 X 768
IMAGE FLIP
1360 X 768
MONITOR ID
TILE MATRIX
HEAT PROTECT
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
BLACK LEVEL EXPANSION
S-VIDEO MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP HIGH
SCAN MODE
SCAN CONVERSION
FILM MODE
+ -:SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
GAMMA SELECTION
S-VIDEO MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP
SCAN MODE
SCAN CONVERSION
FILM MODE
:SEL :NEXT :RETURN :EXIT MENU
SET EXIT MENU
ADVANCED OPTION IMAGE FLIP
S-VIDEO MODE
NORMAL
BLACK LEVEL EXPANSION
H MIRROR
GAMMA SELECTION
V MIRROR
IMAGE FLIP
ROTATE
SCAN MODE
SCAN CONVERSION
FILM MODE
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
SCAN MODE
S-VIDEO MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP OVERSCAN
SCAN MODE
SCAN CONVERSION
FILM MODE
+ -: SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
SCAN CONVERSION
S-VIDEO MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP PROGRESSIVE
SCAN MODE
SCAN CONVERSION
FILM MODE
+ -: SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
FILM MODE
S-VIDEO MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
IMAGE FLIP
SCAN MODE
SCAN CONVERSION
FILM MODE
+ -: SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
MONITOR ID
MONITOR ID
IR CONTROL
TILE MATRIX
ID No.
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
+ -: SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
English-26
Selects the S-Video input port function.
PRIORITY:
If cable is connected to the S-Video input, it will have
priority over the composite input port.
/ SEPARATE
SEPARATE:
S-Video port and Composite port can be selected as
EXIT :RETURN MENU :EXIT MENU
independent input ports.
Sets of the resolution of input signal to one of the
following: 1024x768, 1280x768 and 1360x768.
AUTO: Determines the resolution automatically.
1024x768 : Sets the resolution to 1024x768
1280x768 : Determines the resolution to 1280x768
:SEL EXIT :RETURN MENU :EXIT MENU
1360x768 : Determines the resolution to 1360x768
Selects a level of black expansion.
To prevent going under the black cut-off level, please
/ MIDDLE / OFF
adjust the "Black Level" in moderation on the OSM
EXIT :RETURN MENU :EXIT MENU menu.
Selects a display gamma.
1: 2.2
2: 2.4
2. 2
3: S gamma
2. 4
S GAMMA
NATIVE
4: Native
:SEL EXIT :RETURN MENU :EXIT MENU NOTE: sRGB picture mode is standard
and cannot be changed.
Selects how the image is flipped or rotated.
NORMAL: normal display.
H MIRROR: Mirror image for horizontal direction.
V MIRROR: Mirror image for vertical direction.
ROTATE: Rotate the image 180 degrees.
:SEL EXIT :RETURN MENU :EXIT MENU
Changes the display area of the image.
/ UNDERSCAN
OVER SCAN: Set to display area about 95%
UNDER SCAN: Set to display area about 100%
EXIT :RETURN MENU :EXIT MENU
Selects IP (Interlace to Progressive) converter function.
PROGRESSIVE: Enable the IP function, to convert
interlace signal to progressive.
/ INTERLACE [NOTE] This mode is the normal setting.
INTERLACE: Disable the IP function.
EXIT :RETURN MENU :EXIT MENU
[NOTE] This mode is better suited for motion
pictures, but increases the risk of image retention.
Selects Film mode function.
AUTO: Enables the Film mode function. This mode is
better suited for movies which are converted to 24
Frames/sec source to DVD Video. We recommend
AUTO / OFF
selecting "PROGRESSIVE" in the "SCAN
CONVERSION" setting.
:RETURN :EXIT MENU
EXIT MENU
OFF: Disable the Film mode function. This mode is better
suited for Broadcasting or VCR source.
Sets the monitor ID number used to control the daisy
chained multiple MultiSync LCD4010s / MultiSync
LCD4610s with RS-232C.
1
The Monitor ID number can be between 1 and 26.
EXIT :RETURN MENU :EXIT MENU
1-27
MAIN MENU
PICTURE
SCREEN
AUDIO
PIP
CONFIGURATION 1
CONFIGURATION 2
ADVANCED OPTION
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU