Upgrading Firmware In Macintosh - Mpio FY 600 User Manual

Upgrading Firmware
7 Click the [ OK ] button after the Hardware Safely
Removed message appears as shown.
Click
Firmware is automatically upgraded when the device is unplugged from your PC.
9
When the firmware upgrade is complete, FY600 will be turned OFF automatically.
Caution
Please be aware if you apply external shock or the battery is low while the player is upgrading the firmware,
it can cause product breakdown or malfunction.
8 After clicking the [ OK ] button, the first part of
firmware upgrade is complete.
Click

Upgrading Firmware in Macintosh

The files in FY600 will be lost after upgrading firmware.
1 Download the firmware for Macintosh from the MPIO web site, and uncompress and save it in the PC.
(www.mpio.com)
2 Turn the power of FY600 ON and connect it to a computer using a USB cable.
3 Save the firmware upgrade file (Image.dat, Player.rom, and Upgrade.axf) in FY600.
Separate FY600 from the computer.
4
5 Firmware is automatically upgraded when the device is unplugged from your PC.
When the firmware upgrade is complete, FY600 will be turned OFF automatically.
Note
To upgrade the firmware, there must be 10MB of free memory space in FY600's memory.
Formatting FY600's memory using Macintosh PC is not recommended. To format FY600, please contact the
customer support center.
The firmware upgrade files for Macintosh are compressed as Stuffit files. When you unzip the file, a TXT file with
information about the changes and an (Image.dat, Player.rom, and Upgrade.axf) file will be created.
Causing outer impact on FY600 or lack of battery during firmware upgrade may cause a malfunction.