Upgrading Firmware - Mpio FL 500 User Manual

Mpio fl 500: user guide
Table of Contents

Advertisement

Upgrading Firmware

Download the firmware from MPIO web site and save it on the PC. (www.mpio.com)
1
Turn the power of FL500 ON and connect it to the PC by using a USB cable.
2
Chcek the mode of player.
3
Firmware upgrade is only available in MSC [Mass Storage Class] mode.
Double-click the downloaded file [MPIO FL500 FW] to run.
4
When the Firmware Upgrade screen appears, click the [NEXT] button according to
5
the following image. To cancel, click the [CANCEL] button.
After firmware upgrade is completed, click the [FINISH] button.
6
Disconnect the USB cable from the player.
7
Click
Note
To cancel firmware upgrade, click the [CANCEL] button.
P lease take note that external impact and low battery while performing a firmware
upgrade may cause product failure or other malfunctions.
For Macintosh users.
- When performing a firmware upgrade on a Macintosh, please follow the instructions on
our web site.
4
Click
Click
Click
Click

Advertisement

Table of Contents
loading

Table of Contents