Upgrading Firmware - Mpio HD 400 User Manual

Upgrading Firmware

See page 63 [Installing the software] for information on how to install MPIO Utility.
1 Download the firmware from MPIO web site and save it on the PC.
(www.mpio.com)
2 Turn the power of HD400 ON and connect it to a computer using a 24PIN USB Multi-Cable.
3 Double-click MPIO Utility icon in your desktop.
4 Click the F/W Upgrade button.
6 Select the downloaded Upgrade.HD400.dwu file in the Browse window and then, click the Open
button.
5 Click the OK button.
Click
Note
 The firmware upgrade file downloaded from the MPIO
web site is a compressed file, and you can upgrade the
device through the MPIO Utility. Please use the utility
when upgrading the firmware.
 MPIO Utility does not support Macintosh. Therefore,
MPIO Utility cannot be used in Macintosh.
Click
Click
87