Troubleshooting - Mpio FY 600 User Manual

Troubleshooting

I cannot turn on the player.
If the battery is completely discharged (flat), the player cannot be turned on.
Replace with battery with new one and turn the player on.
I cannot hear any sound or, I can hear noise.
Check the sound volume.
Your player may be influenced by the neighboring electrical device.
If the music file is damaged, noise or sound interruption can occur.
Letters on the LCD look broken.
Reset the language to English in the [Setting language] (See page 46). Then, set the file name
using the [Setting display of track information] menu (See page 47).If the problem still cannot
be resolved, contact our customer service center. However, some special fonts/languages may
still look broken.
I can see that some memory is used but no saved file is found.
Execute the [Format & Config] command using MPIO utility. (See page 63.)
If you run the above command, all files in the product will be removed.
You can check the data file only when the player is connected to the PC.
Letters on the LCD look broken. I can hear noise and cannot set the broadcasting
channel when I listen to the radio.
Your player may be influenced by the neighboring electrical device. Secure enough distance.
The earphone plays a role of an antenna when listening to the radio. Therefore, reception
sensitivity can be deteriorated if you don't use an earphone. Of, FM reception may be poor in
some area. Please understand that.
I cannot download the file from the PC
Connection to the PC using the extension cable or USB hub cannot be guaranteed.
Make sure to use the USB cable provided with the product as an accessory when connecting
the player to the PC.
FY600 suddenly stops and something seems wrong.
Check the battery. Lack of battery may cause FY600 to stop.
Upgrading the firmware is too hard.
Try using the bundled MPIO utility. Mac users can just copy the provided file into FY600.