Upgrading Firmware - Mpio ML 100 User Manual

Upgrading Firmware

Download the firmware from MPIO website to your computer. (www.mpio.com)
1
Turn on ML100 and connect it to your computer by using a USB cable.
2
Please check that the player is in the MSC mode.
3
You can switch to the MSC mode to press the lever in vertical direction.
Firmware upgrade is only available in the MSC [Mass Storage Class] mode.
4
When the Firmware Upgrade screen appears, click the [NEXT] button according to
5
the following image.
To cancel, click the [CANCEL] button.
6
After firmware upgrade is completed, click the [FINISH] button.
7
Disconnect the USB cable from the player.
8
Click
Note:
To cancel firmware upgrade, click the [CANCEL] button.
Please take note that external impact and low battery while performing a firmware up
grade may cause device failure or other malfunctions.
For Macintosh Users
When performing a firmware upgrade on a Macintosh, please follow the instructions on
our website.
4
Click Click Click Click