Removing Hs100 From Your Computer; In Case Of Macintosh Computer - Mpio HS 100 User Manual

HS100-Eng_Bestbuy 8/12/97 8:24 PM

3) Removing HS100 From Your computer

• To remove the device safely from your computer, just go
through the following steps. Be sure to double-check each step
so as to avoid the risk of data loss or damage to the device.
• Direct the mouse's pointer on the hot plug icon of the work tray
and then right click it.
• If you select "Safely Remove hardware" the following message
pops up.
• When the window for the "Safe Remove Hardware" appears,
select the "USB Mass Storage Device" in the window. This indi-
cates the hardware device. Click the [Stop] button.
12
English
Page 12
• When the "Stop a Hardware Device" window appears, confirm
the "USB Mass Storage Device" item and then press the [OK]
button.
• When the window for the "Safe Detachment of Hardware"
appears, press the [Close] button, then remove HS100 from the
computer.

7. In Case of Macintosh Computer

Driver Installation
You can use HS100 without installing the Driver in Macintosh OS
version 9.x ~ X.
Data transfer between Windows and Macintosh OS is not guaranteed.
13
English