Storing Default Settings; Upgrading Firmware - Mpio FY 600 User Manual

Storing Default Settings

When FY600 has been formatted using the Windows FORMAT Command (FAT or FAT16), the
default settings must be restored using MPIO Utility's Setup Config function. Refer to page 13
[Installing the software] for more information about installing MPIO Utility.
Turn the power of FY600 ON and connect it to a computer using a USB cable.
1
Double-click MPIO Utility icon in your desktop.
2
Click the [Setup Config] button.
3
Click
Click the [ OK ] button after the Safely
5
Remove Hardware message appears as
shown.
Click
Click the [ OK ] button
4
Click
After clicking the [OK] button, Setup Config
6
(Default Setting Restoration) is complete.
You can unplug the device from the PC.
Click

Upgrading Firmware

The files in FY600 will be lost after upgrading firmware.
Refer to page 13 [Installing the software] for information on how to install MPIO Utility.
1 Download the firmware from the MPIO web site, and uncompress and save it in the PC.
(www.mpio.com)
2 Turn the power of FY600 ON and connect it to a computer using a USB
cable.
3 Double-click MPIO Utility icon in your desktop.
Click the [F/W Upgrade] button.
4
Click
Select the downloaded Upgrade.FY600.dwu file in the [ Browse ] window and then,
6
click the [ Open ] button.
Click
Click the [ OK ] button.
5
Click
Note
The firmware upgrade files provided at MPIO web
site are compressed as ZIP files. When you unzip
the file, a TXT file with information about the
changes and an Upgrade_FY600.ROM file will be
created.