Page 2
- Products and products described in this manual are the trademark or registered trademark For more information on the MPIO products, visit our web site on the Internet. You can find of the corresponding company or organization, and ™ or mark not always displayed many answers to the customer’s various enquiries, or upgrade the product performance...
You should back up the data saved in the product before requesting the after service. MPIO will consider that the customers have backed up their data before sending it to MPIO for after service. MPIO will not back up your data upon receiving the after service request. Additionally, MPIO will bear no responsibility over data loss...
Table of Contents Getting Started Listening to FM Radio ..........29 Setting Screen Display ..........45 Searching Radio Frequency Manually (Scan Mode) ..29 Customer Support Safety Precautions ...........4 Select Visualization ..........45 Searching Radio Frequency Automatically (Scan Mode) ...29 Product Features ............8 Setting Language .............46 Menu Structure ............62 Setting Save Channel ..........29 Components .............9...
License Real Player program is bundled with this product, which enables to author MP3 file and use the Note music library. Actual player may vary slightly from images shown, and subject to change without notice. Broken accessories may be purchased separately at MPIO Service Center.
Name of the Parts Using the Lever Neck String Hole Earphone Jack Functioning by pushing the lever up, down, left, right direction and pressing it. Microphone Pressing the Lever: Press the lever down or press and hold it. Pushing Up : Push the lever or push and hold it up. Pushing Down: Push the lever or push and hold it down.
System Requirement Installing the Software IBM PC How to install windows 98 device driver, MPIO utility and other utility. System: USB Interface 2.0, Standard device and a CD-ROM Drive equipped CPU: Pentium 133MHz or faster Memory: 64MB or more Insert the Installation CD into the CD-ROM Drive.
Page 8
Click the [Finish] button to finish the installation. Click the [Next] button. Check the MPIO Utility icon on the desktop to All the utility programs will be installed. confirm installation. The user can select the programs needed to install.
Check “Search for the driver for your device”, click the [Next] button. Windows 98/ME: [Control Panel] → [Systems] → [Device Manager] → [Hard Disk Controllers]→ MPIO FY600 USB Device Windows 2000/XP: [Control Panel] → [Systems] →[Hardware]→[Device Manager] →[Disk Drives]→ MPIO FY600 USB Device...
Windows 98/ME: [ Control Panel ] → [ Systems ] → [ Device Manager ] → Click [ Hard Disk Controllers ]→ MPIO FY600 USB Device Click Drag & Drop: Select the data store, click and hold down the left mouse button to drag the files into the Removable Disk drive, and then release the left mouse button.
To Stop (Turning Power OFF) Select USB Mass Storage Device from the list of hardware, and click the [Stop] button. When the “Stop a Hardware Device” window appears, select MPIO FY600 USB Device. Pressing button pauses during playback and it is automatically turned-off if there is no Then, click the [OK] button and disconnect the USB Cable.
Adjusting Volume / Using Hold Switch Switching Mode Press and hold the FUNC button during playback or in pause. To Adjust the Volume Push the lever toward + / − direction during playback or pause Pushing FUNC button can change either music playback or FM radio mode. to adjust the volume.
Voice Recording Using Navigation Mode Uses navigation function for more convenient to search folders or files you wish. Voice recording starts if REC button is pressed during pause. Voice Recording does not work while music is playing. Press the lever during playback or in pause to enter Navigation Mode. A file list will appear on the LCD screen.
Setting My List Deleting File Setting My List Press FUNC button after moving to the file you want to delete in navigation mode. A pop up menu will appear. Press the FUNC button after moving to the file you want in navigation mode. Push the lever toward + / −...
Finding Music / Voice Recording Files Listening to FM Radio Press and hold the FUNC button to switch to FM Mode. (Refer to “Switching Mode” on page 23) Fast Forward / Rewinding During Playback Searching Radio Frequency Manually (Scan Mode) Searching Radio Frequency Automatically (Scan Mode) Push the lever in directions during playback to Fast forward / rewind the music.
Listening to FM Radio Recording FM Radio Records the selected FM Radio broadcast Changing Radio Frequency Saved Press the REC button to start FM radio recording while listening to FM radio. Press the lever towards the vertical direction shortly, and select the saved channel number when the Save Channel window appears.
Setting Repeat Setting Menu Press the REC button in the start position of the music/voice file to repeat during playback. appears on LCD window and icon is blinking. WESTLIFE-MY LOVE 00:00:30 Press the REC button again to release repeat. Pause is usable during Sector Repeat.
Changing the EQ Setting Setting User EQ You can define your own EQ effect by adjusting the setting values in each frequency range, Select Audio in the menu. instead of the pre-defined EQ setting values. Push the lever in + / − directions to select EQ and then, push the lever in direction or press it to enter.
Changing Play Order Setting 3D Sound Effect Select ‘How to playback’ of the music files saved. 3D sound effect will enhance your music experience. Select Audio in the menu. Select Audio in the menu. Push the lever in + / − directions to select Repeat and then, push the lever in direction or press it to enter.
Setting FM Radio Saving Channel in Menu Setting FM Frequency Bandwidth Set by pressing and hold the FUNC button after change to FM radio mode. Select the FM frequency band to receive. Saving channel in menu can not be set in music mode. Select FM Radio in menu.
Setting FM Radio Setting FM Sound Setting Auto Channel Save Select the sound modes for FM Radio. Set by pressing and hold the FUNC button after change to FM radio mode. Auto scan menu can not be set under the other mode. Select FM Radio in menu.
Setting FM Radio Setting Recording Setting the Quality of Voice Recording Setting Seek Steps Set the quality of voice recording. Select the seek steps for scanning frequencies. Select Recording in menu. Select FM Radio in menu. Push the lever in + / − directions to select Voice-Quality and then, push the lever in direction Push the lever in + / −...
Setting Recording Setting Screen Display Select Visualization Setting the Quality of FM Recording Select the visualization shown at the bottom of the LCD screen. Set the quality of FM recording. Select Recording in menu. Select Display in menu. Push the lever in + / − directions to select FM-Quality and then, push the lever in direction or Push the lever in + / −...
Setting Screen Display Setting Language Setting Track Information Indicator Assigning the language of ID3 tag of the music can display the accurate information of the file. 55 differences of Set the Music file information shown in the LCD screen. languages support ID3 tag in total. English, Korean, Traditional Chinese, Simplified Chinese, Japanese, Spanish and Russian support ID3 tag with menu among 55 languages.
Setting Screen Display Setting Playing Time Indicator Setting Scroll Speed Select the Playing Time indicator shown in the LCD screen. Adjust the scroll speed of the text shown in the LCD screen. Select Display in menu. Select Display in menu. Push the lever in + / −...
Setting Screen Display Setting Contrast Setting Lighting Time You can adjust the contrast of the LCD window. Set the light time for the LCD screen. Select Display in menu. Select Display in menu. Push the lever in + / − directions to select Contrast and then, push the lever in direction or Push the lever in + / −...
Off: Hides the lyrics of the current song. Caution Any file format that MPIO does not support might not be able to display the lyrics even if they have lyrics’ Left Hander : It shows to be operated with left hand, rounding LCD screen to 180 degree.
Setting System Setting Auto Playback Setting Memorized Playback The device may be set to play music automatically once the power is turned ON. When turned On, the Resume function allows the player to begin playing music from the last position. Select System in menu.
Setting System Setting Fade In Confirming Device Information Fade in setting increase the music volume steadily so that the user is not surprised by the loud Check the version of firmware saved on the device, using memory size and the information of the music.
Setting System Setting Sleep Timer Setting Auto Power Off Time When listening to music or FM radio, you can set up the device so that the power is Auto Power Off function turns the power OFF when a certain period of time passes after automatically turned OFF after a certain period of time.
Setting System Initializing to Default Setting Playback Speed Resets all the user’s menu settings and initializes all menu settings to default settings. Playback speed can be adjustable and it is very useful on studying foreign language. Playback speed control is applied to only MP3 file format. Select System in menu.
Menu Structure Formatting You can format FY600 from a Windows PC using MPIO Utility. Turn the power of FY600 ON and connect it to a computer using a USB cable. Double-click MPIO Utility icon in your desktop. System Audio FM Radio...
Click Note When formatting the device using the Windows FORMAT Command, it must be formatted in FAT or FAT16. To use the device after it has been formatted, the default settings must be restored using MPIO Utility. Click Click Refer to page 66 [Storing Default Settings] for more information.
MPIO Utility’s Setup Config function. Refer to page 13 [Installing the software] for more information about installing MPIO Utility. Download the firmware from the MPIO web site, and uncompress and save it in the PC. (www.mpio.com) Turn the power of FY600 ON and connect it to a computer using a USB cable.
firmware upgrade is complete. The files in FY600 will be lost after upgrading firmware. Download the firmware for Macintosh from the MPIO web site, and uncompress and save it in the PC. (www.mpio.com) Turn the power of FY600 ON and connect it to a computer using a USB cable.
Execute the [Format & Config] command using MPIO utility. (See page 63.) Try using the bundled MPIO utility. Mac users can just copy the provided file into FY600. If you run the above command, all files in the product will be removed.