Formatting - Mpio FY 600 User Manual

Formatting

7 When formatting is complete, click
the [ OK ] button.
Click
9 Click the [ OK ] button after the "Safely
Remove Hardware" message appears as
shown.
Click
Note
The captured screens of MPIO Utility may vary for the user's PC environment.
MPIO Utility cannot be run under MAC OS.
For information regarding MPIO Utility installation, refer to [Installing the software] on page 13.
8 Click the [ Close ] button.
Click
10 After clicking the [ OK ] button, Format & Config
(Default Setting Restoration) is complete. You
may separate the device from the PC.
Click
Follow the instructions when formatting FY600 using a Windows PC without MPIO Utility.
Using MPIO Utility is recommended for formatting the device.
1 Select the Removable Disc icon. Click your right mouse button and select FORMAT.
Click the [Start] button.
Note
When formatting the device using the Windows FORMAT Command, it must be formatted in FAT or FAT16.
To use the device after it has been formatted, the default settings must be restored using MPIO Utility.
Refer to page 66 [Storing Default Settings] for more information.
The captured screens of MPIO Utility may vary for the user's PC environment.
Caution
The files in FY600 WILL BE LOST after formatting.
Click