Lockly SECURE LATCH EDITION Installation Manual page 11

Step 4
1
Install the exterior lock as shown to
the left by aligning the lock straight
and passing the cable and attached
rods through the lockset.
2
Pass the Spindle
center of the lockset, and the
round rods through the sides in
their respective holes.
should run underneath the lockset.
C
through the
The cable
INSTALLING THE LOCK (EXTERIOR)
3
Align the lock straight and press hard (if
you use the Adhesive tape in step 3.4)
to secure the top of the lock.
10
Exterior