Korg Microkorg XL User Manual page 76

microKORG XL
SYNC.NOTE (LFO Sync Note) .............................................. [8/1...1/64]
Sets the LFO frequency as a proportion of the tempo set by the [TEMPO]
knob.
This parameter will be displayed and can be set if "LFO SYNC" is ON.
NOTE
p. 66 "SYNC.NOTE (LFO Sync Note)"
LFO WAVE (LFO Waveform) ............... [SAW, SQUARE, TRIANGLE, SINE, S&H]
Selects the LFO waveform.
p. 66 "LFO WAVE (LFO Waveform)"
LFO SHAPE ..........................................................................[–63...+63]
p. 66 "LFO.SHAPE"
KEY SYNC (LFO KeySync) ............................................................[OFF, ON]
Specifies whether the LFO will be reset by note-on.
p. 67 "KEY SYNC (LFO KeySync)"
INI.PHASE (LFO Init Phase) ...................................................[000...180°]
Sets the starting location of the waveform.
This parameter will be displayed and can be set if "KEY SYNC" is ON.
NOTE
p. 67 "INI.PHASE (LFO Init Phase)"
LFO.SPRD (LFO Spread) ...................................................[–180...+180°]
Sets the LFO phase difference between the left and right channels.
14. PHASER (Stereo Phaser)
This effect creates a swell by shifting the phase. You can add spread to the
sound by offsetting the phase of the left and right LFOs from each other.
Stereo In - Stereo Out
Left
Right
LFO LFO Shape
76
Dry / Wet
Phaser
Resonance
High Damp
Phaser
Dry / Wet
LFO Spread
DRY/WET...................................................... ["DRY", 99:1...1:99, "WET"]
Sets the balance between the effect and dry sounds.
TYPE................................................................................. [BLUE, U_VB]
Selects the phaser type.
MANUAL ......................................................................... [000...127]
Sets the frequency to which the effect is applied.
MOD.DEPTH (Modulation Depth)
Sets the depth of LFO modulation.
RESO (Resonance) ........................................................... [000...127]
Sets the resonance amount.
PHASE.......................................................................................... [+, –]
Switches the phase of the output and feedback.
LFO SYNC (LFO Tempo Sync) .......................................................[OFF, ON]
Specifies whether the LFO cycle will be synchronized with the tempo speci-
fied by the [TEMPO] knob or MIDI clock.
p. 66 "LFO SYNC (LFO Tempo Sync)"
LFO FREQ (LFO Frequency) ......................................... [0.01...100.0Hz]
Sets the LFO speed.
p. 66 "LFO FREQ (LFO Frequency)"
SYNC.NOTE (LFO Sync Note) ..............................................[8/1...1/64]
Sets the LFO frequency as a proportion of the tempo set by the [TEMPO]
knob.
This parameter will be displayed and can be set if "LFO SYNC" is ON.
NOTE
p. 66 "SYNC.NOTE (LFO Sync Note)"
LFO WAVE (LFO Waveform)................ [SAW, SQUARE, TRIANGLE, SINE, S&H]
Selects the LFO waveform.
p. 66 "LFO WAVE (LFO Waveform)"
LFO.SHAPE ......................................................................... [–63...+63]
p. 66 "LFO.SHAPE"
...................................... [000...127]