Korg Microkorg XL User Manual page 17

EG2
Level
Note on
Attack Level
0
[1] [2]
[1]: Attack Time
[2]: Decay Time
Performance editing when ASSIGN is selected
If the [KNOB FUNCTION SELECT] dial is set to "ASSIGN," the most useful
parameters for the currently selected program will be assigned to the
knobs.
You are free to change the parameters that are assigned to the knobs.
NOTE
For each program, you can freely assign a parameter to each knob
[1]–[3] and use it to control the program. ( p. 34 "KNOB")
Performance editing when EFFECT is selected
If the [KNOB FUNCTION SELECT] dial is set to "EFFECT," parameters for
the effect used by the currently selected program will be assigned to the
knobs.
Knob [1] (FX1 DRY/WET, knob [2] (FX2 DRY/WET)
These adjust the balance between the effect sound and direct sound of the
FX1 and FX2 effects.
Turn the knob all the way to the left for a sound without any effect applied
("dry"), or all the way to the right for the maximum effect sound ("wet").
These knobs won't do anything if the FX TYPE of the selected program is
NOTE
set to "FX OFF." In this case, the display will indicate "INVALID."
Note off
[3]
Time
[4]
[3]: Sustain Level
[4]: Release Time
Knob [3] (FX1 CONTROL 1)
This adjusts the parameter that's assigned to CTRL-1 (FX1 CONTROL 1)
for the effect used by the currently selected program.
You are free to change the parameter that's assigned to this knob. Refer
NOTE
to page 63 "Controlling effect parameters."
This knob won't do anything if the FX TYPE of the selected program is
NOTE
set to "FX OFF," In this case, the display will indicate "INVALID."
Quick start
17