Korg Microkorg XL User Manual page 75

DELAY ...................................................................... [00.0...30.0ms]
Sets the delay time in millisecond steps.
MOD.DEPTH (Modulation Depth) .......................................[000...127]
Sets the depth of LFO modulation.
FEEDBACK .......................................................................[000...127]
Sets the amount of feedback for the left and right channels.
PHASE ..........................................................................................[+, –]
This switches the phase of the output and feedback.
LFO SYNC (LFO Tempo Sync) .......................................................[OFF, ON]
Specifies whether the LFO cycle will be synchronized with the tempo speci-
fied by the [TEMPO] knob or MIDI clock.
p. 66 "LFO SYNC (LFO Tempo Sync)"
LFO FREQ (LFO Frequency) ........................................ [0.01...100.0Hz]
Sets the LFO speed.
p. 66 "LFO FREQ (LFO Frequency)"
SYNC.NOTE (LFO Sync Note) .............................................. [8/1...1/64]
Sets the LFO frequency as a proportion of the tempo set by the [TEMPO]
knob. p. 66 "SYNC.NOTE (LFO Sync Note)"
This parameter will be displayed and can be set if "LFO SYNC" is ON.
NOTE
LFO WAVE (LFO Waveform) ............... [SAW, SQUARE, TRIANGLE, SINE, S&H]
Selects LFO Waveform. p. 66 "LFO WAVE (LFO Waveform)"
LFO.SHAPE ..........................................................................[–63...+63]
p. 66 "LFO.SHAPE"
KEY SYNC (LFO KeySync) ............................................................[OFF, ON]
Specifies whether the LFO will be reset by note-on.
p. 67 "KEY SYNC (LFO KeySync)"
INI.PHASE (LFO Init Phase) ...................................................[000...180°]
Sets the starting location of the waveform.
Phase)"
This parameter will be displayed and can be set if "KEY SYNC" is ON.
NOTE
13. VIBRATO (Stereo Vibrato)
p. 67 "INI.PHASE (LFO Init
LFO SPRD (LFO Spread)....................................................[–180...+180°]
Sets the LFO phase difference between the left and right channels.
HI DAMP (High Damp) ........................................................[000...100%]
Sets the feedback damping amount in the high range.
This effect causes the pitch of the input signal to shimmer. Using the Auto-
Fade allows you to increase or decrease the shimmering speed.
Stereo In - Stereo Out
Left
Vibrato
Vibrato
Right
LFO Shape
LFO
DRY/WET...................................................... ["DRY", 99:1...1:99, "WET"]
Sets the balance between the effect and dry sounds.
MOD.DEPTH (Modulation Depth) ...................................... [000...127]
Sets the depth of LFO modulation.
LFO SYNC (LFO Tempo Sync) .......................................................[OFF, ON]
Specifies whether the LFO cycle will be synchronized with the tempo speci-
fied by the [TEMPO] knob or MIDI clock.
p. 66 "LFO SYNC (LFO Tempo Sync)"
LFO FREQ (LFO Frequency) ......................................... [0.01...100.0Hz]
Sets the LFO speed.
p. 66 "LFO FREQ (LFO Frequency)"
Effect guide
Dry / Wet
Dry / Wet
LFO Spread
75