HOMCOM A90-232 Assembly Instruction Manual page 20

Step1:
Attach the Front Stabilizer (No.3) to the
Main Frame (No.1) using 2 Carriage
Bolts (No.19), 2 Arc Washers (No.26)
and 2 Cap Nuts (No. 27). Tighten with
Spanner (No.90).
Attach the Rear Stabilizer (No.9) to the
Main Frame (No.1) using 2 Carriage
Bolts (No.19), 2 Arc Washers (No.26)
and 2 Cap Nuts (No. 27). Tighten with
Spanner (No.90).
Step 2:
Attach the Seat Cushion (No.63) to the
Cushion Frame (No.4), making sure the
correct side is facing up, using 4 Bolts
(No.28) and 4 Flat Washers (No.23).
Tighten with Allen Wrench (No.91).
Attach the Backrest Cushion (No.64) to
the Cushion Frame (No.4) using 2 Bolts
(No.29) and 2 Flat Washers (No.23).
Tighten with Allen Wrench (No.91).
ASSEMBLY INSTRUCTIONS
20