HP Kayak XU User Manual page 42

Completing the Video
Memory Installation
Procedure
NOTE
Video Adapter
Accessories Available
from Other Sources
2 How to Install Accessories Inside Your PC Workstation
Installing Memory
3 Attach the memory module to the connectors on the video adapter.
4 Replace the video adapter in the computer. Carefully slide the board
back into its accessory slot. Firmly press the board into the socket.
Make sure that the board slides into the socket completely and does
not touch components on other boards. Secure the video adapter.
5 Install any other accessories before replacing the cover (see
page 23). Reconnect all cables and power cords.
1 Switch on the PC Workstation.
2 Check that the Setup program has detected and configured the
Video memory.
If you need to use a special video driver for your application, you may
be asked to insert the CD-ROM or diskette containing the driver.
Additional accessories, including memory upgrades and a video MPEG
module, are available for your video adapter. However, these accessories
cannot be ordered from HP. Contact your dealer for more details about
these accessories.
30 English
Connectors