Configuring Accessory Boards - HP Kayak XU User Manual

Plug and Play
ISA Accessory Boards
Non-Plug and Play ISA
Accessory Boards
2 How to Install Accessories Inside Your PC Workstation
Installing Accessory Boards
When is selected, the BIOS will automatically configure any
YES
bootable Plug and Play accessories, and the system will
automatically configure all remaining Plug and Play accessories.
However, if you install a non-Plug and Play accessory board, you
must use the Add New Hardware wizard to determine a conflict-free
setting for the board.
3 Press to save your selection and exit from the Setup program.
Configuring Accessory Boards (Windows 95 only)
The system can detect and automatically configure Plug and Play
accessories when you specify
program.
You must run the Add New Hardware wizard to configure non-Plug and
Play accessories. The Add New Hardware wizard can identify
automatically many accessory boards.
If the Add New Hardware wizard does not recognize the accessory
board, you can manually select the accessory board from a list of
supported products. Your PC Workstation is preloaded with
configuration details for many non-Plug and Play accessory boards.
The system will determine the recommended settings for each ISA
non-Plug and Play board you want to install. These settings may be
different from those recommended by the accessory board's
manufacturer. In this case, the board's jumper settings and driver
options must be altered.
To run the Add New Hardware wizard:
1 Click the Start button on the the task bar.
2 Point to Settings and Control Panel.
3 Double-click Add New Hardware.
4 Follow the instructions provided by the Add New Hardware wizard
to configure the accessory board.
46 English
for
YES Plug & Play O/S
in the Setup