HP Kayak XU User Manual page 112

Advanced Configuration
Options Menu
4 Technical Information
Configuring a SCSI Accessory Using SCSISelect
• Initiate Wide Negotiation
This option determines whether the SCSI channel attempts 16-bit
data transfer instead of 8-bit data transfer. By default, it is set to
unless FastRAID is installed, when it is set to
• Send Start Unit Command
When set to
Yes
power supply by allowing the interface to power-up SCSI devices
one-at-a-time when you start your computer. When set to
SCSI device powers up at the same time.
This option is not supported by some SCSI devices. Some SCSI
devices require a jumper to be changed before they can respond to
this command.
• BIOS Multiple LUN Support
More advanced SCSI devices can have several logical units (LUN).
This option determines whether booting a SCSI device that has
multiple LUNs is supported. Set this option to
has multiple LUNs. It is set to no by default.
• Include in BIOS Scan
This setting, when set to
by the host adapter with this SCSI ID. When set to
does not control the SCSI device.
It is recommended that these settings are not changed.
Advanced Configuration Options
Plug and Play Scam Support .................................... Enabled
Extended BIOS Translation for DOS Drives > 1 GByte ............ Enabled
Reset SCSI Bus at IC Initialization............................ Enabled
Options Listed Below Have NO EFFECT if the BIOS is Disabled
Host Adapter BIOS (Configuration Utility Reserves BIOS Space).. Enabled
Support Removable Disks Under BIOS as Fixed Disks.............. Boot Only
Display F6 Message During BIOS Initialization.................. Enabled
BIOS Support for Bootable CD-ROM............................... Enabled
BIOS Support for Int13 Extensions.............................. Enabled
Use the and
display a menu with a selection of values.
100 English
this option reduces the load on your computer's
, allows the SCSI device to be controlled
Yes
keys to move between options. Press
No
.
Yes
each
No
if your boot device
Yes
, the adapter
No
,
to